Model 36 Finger Brake

$5,865.00

Finger Brakes are used to form and duplicate boxes, pans, angles, channels, flanges, and “V’s” out of sheet metal – up to 16 gauge mild steel. The operator can easily adjust for material thickness, and use adjustable stops to control bend angle. Box finger segments enable the operator to form boxes from 3/4″ up to the full width of the machine in increments as small as 1/4″.

MODEL 36 FINGER BRAKE MANUAL

Category:
  • Zero radius fingers (2 of each):
    • 3/4”
    • 1”
    • 1-1/4”
    • 3”
    • 6”
  • Adjustable stops – control bend angle
  • Quik-set micrometer back gauge – adjustment 0” to 24”
  • Machine stand – dimensions 48” L x 15” W x 33” H – $495.00
MODEL 24MODEL 36
US UNITSMETRICUS UNITSMETRIC
MAXIMUM CAPACITY – MILD STEEL16 GAUGE1.5 MM16 GAUGE1.5 MM
MAXIMUM FORMING WIDTH24”609.6 MM36”914.4 MM
CLEARANCE THROUGH TOP OPENING1”25.4 MM
MAXIMUM DEPTH OF BOX OR PAN3”76.2MM3”76.2 MM
MINIMUM REVERSE BEND1/4”6.4MM1/4”6.4MM
MAXIMUM ANGLE BEND – ONE OPERATION135°135°135°135°
MAXIMUM BACK GAUGE ADJUSTMENT24″609.6MM24″609.6MM
MACHINE SHIPPING WEIGHT350 LBS158.8 KGS550 LBS6249.5 KGS
STAND NET WEIGHT94 LBS42.6 KGS104 LBS47.2 KGS

MODEL 36 FINGER BRAKE MANUAL
INSTRUCTION – QUIK-SET MICROMETER BACK GAUGE

  • Box fingers with 1/16” or 1/8” radii (custom radii are quoted upon request)
  • Extension box and radius extension fingers
  • Open end fingers for forming triangular, square, tapered, and rectangular shapes

FINGER ILLUSTRATION