Finger Brakes are used to form and duplicate boxes, pans, angles, channels, flanges, and “V’s” out of sheet metal – up to 16 gauge mild steel. The operator can easily adjust for material thickness, and use adjustable stops to control bend angle. Box finger segments enable the operator to form boxes from 3/4″ up to the full width of the machine in increments as small as 1/4″.
Model 24 Finger Brake
$6,375.00
- Zero radius fingers (2 of each):
- 3/4”
- 1”
- 1-1/4”
- 3”
- 6”
- Adjustable stops – control bend angle
- Quik-set micrometer back gauge – adjustment 0” to 24”
- Machine stand – dimensions 38” L x 15” W x 33” H – $875.00
- 24″ Finger Set – $2,020.00
- Zero radius fingers:
- 3/4” – $120.00
- 1” – $130.00
- 1-1/4” – $160.00
- 3” – $250.00
- 6” – $350.00
| MODEL 24 | MODEL 36 | |||
|---|---|---|---|---|
| US UNITS | METRIC | US UNITS | METRIC | |
| MAXIMUM CAPACITY – MILD STEEL | 16 GAUGE | 1.5 MM | 16 GAUGE | 1.5 MM |
| MAXIMUM FORMING WIDTH | 24” | 609.6 MM | 36” | 914.4 MM |
| CLEARANCE THROUGH TOP OPENING | 1” | 25.4 MM | – | – |
| MAXIMUM DEPTH OF BOX OR PAN | 3” | 76.2MM | 3” | 76.2 MM |
| MINIMUM REVERSE BEND | 1/4” | 6.4MM | 1/4” | 6.4MM |
| MAXIMUM ANGLE BEND – ONE OPERATION | 135° | 135° | 135° | 135° |
| MAXIMUM BACK GAUGE ADJUSTMENT | 24″ | 609.6MM | 24″ | 609.6MM |
| MACHINE SHIPPING WEIGHT | 350 LBS | 158.8 KGS | 550 LBS | 6249.5 KGS |
| STAND NET WEIGHT | 94 LBS | 42.6 KGS | 104 LBS | 47.2 KGS |
MODEL 24 FINGER BRAKE MANUAL
INSTRUCTION – QUIK-SET MICROMETER BACK GAUGE
- Box fingers with 1/16” or 1/8” radii (custom radii are quoted upon request)
- Extension box and radius extension fingers
- Open end fingers for forming triangular, square, tapered, and rectangular shapes
