Di-Acro Slip Rollers feature a cam-actuated Idler Roll which permits the forming of circles without flat spots on the leading edge of the material. The operator is also able to locate bends at any point along a sheet of material. Parts can be duplicated with a high-degree of accuracy since the Idler Roll always returns to its pre-set position. Round, flat, and square material can be formed with Di-Acro Rollers by grooving the bending rolls to accommodate the shape of the material.
Model 12 Slip Roller
$3,580.00
- 2” diameter forming rollers
- Rear roll indicators – enable operator to adjust Idler Roll to a previous setting
- Machine stand – dimensions 20” L x 15” W x 33” H – $715.00
- Grooved rollers available upon request
| MODEL 12 | MODEL 24 | |||
|---|---|---|---|---|
| US UNITS | METRIC | US UNITS | METRIC | |
| MAXIMUM CAPACITY – MILD STEEL* | 16 GAUGE | 1.5 MM | 20 GAUGE | .9 MM |
| MAXIMUM FORMING WIDTH | 12” | 304.8 MM | 24” | 609.6 MM |
| DIAMETER OF ROLLS | 2” | 50.8 MM | 2” | 50.8 MM |
| MINUMUM RADIUS | 1” | 25.4 MM | 1” | 25.4 MM |
| MAXIMUM RADIUS | NO LIMIT | NO LIMIT | NO LIMIT | NO LIMIT |
| MACHINE SHIPPING WEIGHT | 170 LBS | 77.1 KGS | 220 LBS | 99.8 MM |
| STAND NET WEIGHT | 69 LBS | 31.3 KGS | 94 LBS | 42.6 KGS |
*Capacity is based on full forming width.
MODEL 12 SLIP ROLLER MANUAL
