Model 24 Finger Brake

$4,650.00

Finger Brakes are used to form and duplicate boxes, pans, angles, channels, flanges, and “V’s” out of sheet metal – up to 16 gauge mild steel. The operator can easily adjust for material thickness, and use adjustable stops to control bend angle. Box finger segments enable the operator to form boxes from 3/4″ up to the full width of the machine in increments as small as 1/4″.

MODEL 24 FINGER BRAKE MANUAL

Category:
  • Zero radius fingers (2 of each):
    • 3/4”
    • 1”
    • 1-1/4”
    • 3”
    • 6”
  • Adjustable stops – control bend angle
  • Quik-set micrometer back gauge – adjustment 0” to 24”
  • Machine stand – dimensions 38” L x 15” W x 33” H – $450.00
MODEL 24 MODEL 36
US UNITS METRIC US UNITS METRIC
MAXIMUM CAPACITY – MILD STEEL 16 GAUGE 1.5 MM 16 GAUGE 1.5 MM
MAXIMUM FORMING WIDTH 24” 609.6 MM 36” 914.4 MM
CLEARANCE THROUGH TOP OPENING 1” 25.4 MM
MAXIMUM DEPTH OF BOX OR PAN 3” 76.2MM 3” 76.2 MM
MINIMUM REVERSE BEND 1/4” 6.4MM 1/4” 6.4MM
MAXIMUM ANGLE BEND – ONE OPERATION 135° 135° 135° 135°
MAXIMUM BACK GAUGE ADJUSTMENT 24″ 609.6MM 24″ 609.6MM
MACHINE SHIPPING WEIGHT 350 LBS 158.8 KGS 550 LBS 6249.5 KGS
STAND NET WEIGHT 94 LBS 42.6 KGS 104 LBS 47.2 KGS

MODEL 24 FINGER BRAKE MANUAL
INSTRUCTION – QUIK-SET MICROMETER BACK GAUGE

  • Box fingers with 1/16” or 1/8” radii (custom radii are quoted upon request)
  • Extension box and radius extension fingers
  • Open end fingers for forming triangular, square, tapered, and rectangular shapes

FINGER ILLUSTRATION