- 2” diameter forming rollers
- Rear roll indicators – enable operator to adjust Idler Roll to a previous setting
Model 12 Slip Roller
Di-Acro Slip Rollers feature a cam-actuated Idler Roll which permits the forming of circles without flat spots on the leading edge of the material. The operator is also able to locate bends at any point along a sheet of material. Parts can be duplicated with a high-degree of accuracy since the Idler Roll always returns to its pre-set position. Round, flat, and square material can be formed with Di-Acro Rollers by grooving the bending rolls to accommodate the shape of the material.
- Machine stand – dimensions 20” L x 15” W x 33” H – $455.00
|MODEL 12||MODEL 24|
|US UNITS||METRIC||US UNITS||METRIC|
|MAXIMUM CAPACITY – MILD STEEL*||16 GAUGE||1.5 MM||20 GAUGE||.9 MM|
|MAXIMUM FORMING WIDTH||12”||304.8 MM||24”||609.6 MM|
|DIAMETER OF ROLLS||2”||50.8 MM||2”||50.8 MM|
|MINUMUM RADIUS||1”||25.4 MM||1”||25.4 MM|
|MAXIMUM RADIUS||NO LIMIT||NO LIMIT||NO LIMIT||NO LIMIT|
|MACHINE SHIPPING WEIGHT||170 LBS||77.1 KGS||220 LBS||99.8 MM|
|STAND NET WEIGHT||69 LBS||31.3 KGS||94 LBS||42.6 KGS|
*Capacity is based on full forming width.
MODEL 12 SLIP ROLLER MANUAL
Round, flat, and square grooves can be machined into rollers to accommodate additional applications. Grooving must be specified at the time of order, and is an additional cost.