Hand Operated Slip Rollers • Model 12 - Model 24
Di-Acro Slip Rollers feature a cam-actuated idler roll which permits the operator to locate bends at any point along a sheet of material with straight sections on one or both ends. The idler roll always returns to its present position, allowing duplication with a high degree of accuracy. Calibrated rear roll indicators enable the operator to quickly adjust the machine when changing from one rolling size to another. Small circles, approximately the same diameter as the forming rolls, can be produced in one operation. Circles of any larger diameter can be created in just two passes through the rolls. Round, flat, square and other materials can be formed with Di-Acro Rollers by grooving the bending rolls to fit the shape of the material. Grooving must be specified at time of order.
Flat Material: Flat material can be rolled part way through the rolls (Illustration A) and when the cam lever is engaged, the idler roll is raised and a bend is formed. Disengaging the cam lever lowers the idler roll, and the material again passes through the rolls in a horizontal or flat position. It is thus possible to form a wide variety of shapes with the Di-Acro Roller.